+64 9 213 3266
Home

Hilux 4.0L A/T GGN15R Adapter Loom & ECU

0

Hilux 4.0L A/T GGN15R Adapter Loom & ECU

$4,349.00 incl. tax | $3,781.64 ex. tax

Categories: , ,

Description

Adapter Loom and ECU Package to Suit:
2005-2008 GGN15R Toyota Hilux 4.0L 1GR-FE Single VVTi Auto Trans 2WD

What’s Included:
Piggyback adapter loom.
Link G4X Storm ECU
Link 3Bar MAP sensor kit
Link IAT sensor kit (1/8 NPT)
DTM12 connector kit
Installation instructions

Details:
Auto trans and drive-by-wire is controlled by stock ECU.
MAF sensor IS retained for auto load signal.
Stock dash is fully functional.
Some additional wiring required
Adapter loom and ECU must be installed by an authorised Link dealer or a trained professional
Base map on ECU is for START-UP ONLY and must be verified and adjusted to the installer/tuner’s satisfaction
Suits OEM ECU Part number: 89661-0K570

MAP sensor and IAT sensor must be wired up from the DTM12 connector in order to get the vehicle running. DTM12 connector also includes wiring for additional inputs and outputs, i.e. flex fuel sensor, fuel pressure sensor, oil pressure sensor, oil temperature sensor, boost control solenoid, etc.

DTM12 Pinout:
1. +12V Switched (Flex fuel sensor / other accessories. 0.5A max)
2. Link A15 TEMP1 (IAT Sensor)
3. Link A16 TEMP2 (Spare)
4. Link A22 AN VOLT2 (Map Sensor)
5. Link A23 DI3 (Flex Fuel Sensor or Spare)
6. Link A24 Sensor Ground (IAT + MAP Sensor)
7. Link A26 AUX8 (Spare)
8. Link A32 +5V Output (MAP Sensor + Additional Sensors)
9. Link A34 Ground (Flex Fuel Sensor or Spare)
10. Link B23 AN VOLT8 (Spare)
11. Link B27 (CAN2 High)
12. Link B28 (CAN2 Low)